Worn suspension parts: signs, checks and the right fitment
Knocks, steering play and uneven tyre wear: what to check, and how to get the right part from your branch.
The short answer
Worn suspension parts show up as knocks over bumps, play in the steering, uneven tyre wear and a vehicle that pulls to one side. This post is for fitment centres and workshops: the signs to check, the Teknosa and Monroe parts ValidTrade supplies, and how to get the right part from your branch.
In this post
- Signs of wear to check
- What each part does
- Parts in the Teknosa and Monroe ranges
- Looking up a part by vehicle
- Before the festive rush
Signs of worn steering and suspension parts
Steering and suspension parts keep a vehicle stable, controlled and comfortable to drive. South African roads are hard on them. Potholes, uneven surfaces and long highway trips all add wear over time.
Worn parts affect steering response, wheel alignment, tyre wear and stability. These are the signs customers describe at the counter or when the vehicle comes into the bay:
- Knocking or rattling when driving over bumps
- Too much play in the steering, or a change in how the steering responds
- Uneven tyre wear
- Vibration or instability while driving
- A vehicle that pulls to one side
Inspect before you replace
Each of these signs can have several causes. Inspect the vehicle and find the worn part before you quote or replace anything.
What each part does
A quick reference for newer staff, and for explaining the job to a customer:
- Control arms connect the suspension to the vehicle structure and allow controlled wheel movement.
- Ball joints allow movement between the steering and suspension parts they connect.
- Tie rod ends and rack ends transfer steering movement to the wheels, so the driver controls direction.
- Stabiliser links connect parts of the anti-roll bar system and support stability.
- Suspension bushes absorb vibration and allow controlled movement between the parts they join.
Steering and suspension parts from ValidTrade
ValidTrade supplies these parts to fitment centres and workshops, mainly from Teknosa, with steering and suspension parts from Monroe.
Steering and drive shafts (Teknosa)
- Steering racks
- Tie rod ends and rack ends
- Inner and outer CV joints
- Drive shafts
- Tripods
Suspension (Teknosa)
- Ball joints
- Control arms
- Bushes and engine mountings
- Shock mountings
- Bearings and hubs
Steering and suspension (Monroe)
- Track control arms
- Ball joints
- Stabiliser links
- Tie rods
- Bushes
Teknosa has supplied steering and suspension parts to the South African market since 2008.
Getting the right part first time
Look up the part by vehicle
Teknosa parts are listed by vehicle in three catalogues: suspension parts (2025), drive shafts and CV joints (2024), and rubber parts (2025). All three are on the Teknosa catalogue page and the suspension and steering range page. The Monroe catalogue for 2024 to 2025 is on the Monroe page. It is a large PDF, so use Wi-Fi if you can.
Confirm fitment with your branch
Once you have found the part, confirm fitment with your nearest ValidTrade branch by phone or WhatsApp before you fit it. Have the vehicle details and the part number from the catalogue to hand. Every branch phone and WhatsApp number is on the branches page.
Fit, then check the alignment
Each part does a specific job. Correct part selection, professional fitment and a wheel alignment check after the repair all matter on a steering or suspension job.
Before the festive rush
The festive season means long trips. A steering and suspension inspection before a long journey finds worn parts that need attention while there is still time to replace them.
For fitment centres and workshops, it is a good moment to offer customers a pre-trip check, and to explain why it pays to fix a problem early. Speak to your branch early about the parts you expect to need.
Trade only
ValidTrade supplies fitment centres and workshops only. Prices are not published on the site. Once your trade account is open, your branch gives you trade pricing by phone or WhatsApp. New to ValidTrade? Open a trade account.
Ranges and catalogues in this post
Steering and suspension questions
What are the signs of worn steering and suspension parts?
Knocking or rattling over bumps, play in the steering, uneven tyre wear, vibration and a vehicle that pulls to one side. Each sign can have several causes, so inspect the vehicle before you replace parts.
How do I find the right Teknosa part for a vehicle?
Look up the part by vehicle in the Teknosa catalogues on the Teknosa page. Then confirm fitment with your nearest branch by phone or WhatsApp before you fit it.
Should steering and suspension be checked before a long trip?
Yes. An inspection before a long journey can find worn or damaged parts that affect handling, while there is still time to replace them.
Open a ValidTrade trade account
For fitment centres, workshops and motor trade businesses in South Africa.