Skip to content
Trade only: ValidTrade supplies fitment centres and workshops.for fitment centres and workshops. General enquiries +27 12 327 2522

How to check brake pads and discs for wear

Pad thickness, disc minimums, noise and judder: a bay checklist, and the right part from your branch.

The short answer

How to check brake pads: remove the wheel, measure the friction material on the inner and outer pad, and compare it with the vehicle maker's minimum. Then check the disc against the minimum thickness stamped on it, and look for scoring, cracks or a lip. This ValidTrade guide is for fitment centres and workshops.

In this post

  • A brake check, step by step
  • Noises, judder and other signs
  • When discs need replacing
  • Brake parts from Ferodo, Optima and Teknosa
  • Finding the right part by vehicle

How do you check brake pads and discs?

A brake check takes a few minutes in the bay. It tells you whether the job is pads only, pads and discs, or a problem in the hydraulics. Work through the same checklist on every vehicle:

  • 1. Ask about the symptoms. Squealing, grinding, judder through the pedal or steering wheel, pulling to one side under braking, or a brake warning light on the dash.
  • 2. Check the brake fluid. The level in the reservoir drops slowly as the pads wear. A sudden drop can point to a leak, so look for one before you top up.
  • 3. Measure the pads. Remove the wheel and measure the friction material left on the inner and outer pad. Replace the pads before they reach the minimum the vehicle maker sets.
  • 4. Compare the wear. Uneven wear between the inner and outer pad, or between the left and right wheel, can point to a sticking caliper or seized slide pins.
  • 5. Measure the disc. Check the thickness with a micrometer at several points around the disc. Compare it with the minimum thickness stamped on the disc.
  • 6. Look at the disc surface. Deep scoring, cracks, blue heat marks or a raised lip at the outer edge all count against reusing the disc.
  • 7. Check the rear brakes. On drum brakes, check the shoe linings for wear and the inside of the drum for scoring.
  • 8. Road test. Test the brakes after the work, before the vehicle leaves the bay.

What do worn brake pads sound like?

Many brake pads have a metal wear indicator that squeals against the disc when the friction material gets low. Other vehicles use an electronic wear sensor that switches on a warning light. A grinding noise usually means the pad is down to its backing plate and is now damaging the disc.

What does brake judder mean?

Judder through the pedal or steering wheel under braking often comes from uneven disc thickness, which customers call a warped disc. Measure the disc at several points before you decide. A vehicle that pulls to one side under braking can point to a sticking caliper or contaminated pads on one side.

When should brake discs be replaced?

Replace a disc when it is at or below the minimum thickness stamped on it, or when it is cracked, deeply scored or causing judder. Replace discs in pairs across the axle, and fit new pads with new discs.

When is it not the pads?

A soft or spongy pedal usually points to the hydraulics, such as air in the system or old brake fluid, not to the pads. Each sign can have more than one cause, so find the fault before you quote or replace anything.

Brake parts from ValidTrade

ValidTrade supplies brake pads, discs, drums and shoes to fitment centres and workshops in South Africa, mainly from Ferodo and Optima.

Ferodo

  • Brake pads, supplied as OE, OES and to the aftermarket
  • Brake discs, made to match the OE design
  • Brake drums, pre-machined and balanced
  • Lined brake shoes for rear-wheel braking

Optima

  • Disc brake pads

Teknosa

  • Brake parts

Ferodo supplies brake pads to vehicle makers as original equipment as well as to the aftermarket.

How do you find the right brake parts for a vehicle?

Look up the part by vehicle

Once you know how to check brake pads and discs, the next step is the right part. Brake parts are listed by vehicle in the brand catalogues. The Ferodo catalogue for 2025 to 2026 is on the Ferodo page, and the Optima Brakes brake pad catalogue is on the Optima page. Both are also on the brakes range page.

Teknosa sits in the ValidTrade brakes range for brake parts, but the catalogues on the Teknosa page cover steering, suspension, CV joints and rubber parts. For Teknosa brake parts, ask your branch.

Confirm fitment with your branch

Once you have the part number, confirm fitment with your nearest ValidTrade branch by phone or WhatsApp before you fit the part. Have the vehicle details and the part number to hand. Every branch phone and WhatsApp number is on the branches page.

Fit, bed in and test

Fit pads and discs as a set across the axle. Bed in new pads the way the pad maker's instructions set out, then road test the vehicle. On the rear, Ferodo brake drums come pre-machined and balanced, which saves fitting time.

Trade only

ValidTrade is a family-owned, trade-only distributor. It supplies fitment centres first, then workshops, from five branches: Pretoria, Johannesburg, Cape Town, Durban and Gqeberha. Prices are not published on the site. Once your trade account is open, your branch gives you trade pricing by phone or WhatsApp. New to ValidTrade? Open a trade account.

Brake check questions

How do you check brake pads for wear?

Remove the wheel and measure the friction material on the inner and outer pad, then compare it with the minimum the vehicle maker sets. Check the brake disc against the minimum thickness stamped on it at the same time. Uneven wear between the two pads can point to a sticking caliper or seized slide pins.

When should brake discs be replaced?

Replace a brake disc when it is at or below the minimum thickness stamped on it, or when it is cracked, deeply scored or causing judder under braking. Discs are replaced in pairs across the axle, and new discs should get new brake pads.

How do fitment centres find the right brake pads for a vehicle?

Look up the vehicle in the Ferodo catalogue for 2025 to 2026 or the Optima Brakes catalogue, both on the ValidTrade brand pages, and note the part number. Then confirm fitment with your nearest ValidTrade branch by phone or WhatsApp before you fit it. ValidTrade supplies trade customers only, from five branches in South Africa.

Open a ValidTrade trade account

For fitment centres, workshops and motor trade businesses in South Africa.